Enum FluteSectionFamily
The family of fluted sections that the tables by flute count describe: which set of defaults a FluteDependentRatioProfile (the bending-equivalent core, read by the cutter beam and the stress ratio) and a FluteDependentAreaEquivalentRatioProfile (the area-equivalent core, read by a one-piece cutter's shank mass estimate and shank thermal nodes) read for the flute count. Set on either profile (Family, Family). The inner beam's family, where the inner beam is a FluteDependentRatioProfile, also gives the table an area-equivalent core left automatic (InnerBeamAreaProfile null) reads, the typical web the cutter canvases draw the inner beam at, and the typical web a one-piece cutter's typed shank mass is bounded by from below (the standard one where the inner beam is anything else). A choice of the user: nothing detects it from the cutter's shape. The flute-count profiles of a cutter saved before the choice existed, and of a new cutter, are Standard, and every physics reading of such a cutter is the standard family's; the cutter canvases draw a ratio of your own above the standard default against the high-strength family's point as well. A ratio of your own (ConstRatioProfile) and a contour of your own have no family.
public enum FluteSectionFamily
- Extension Methods
Fields
HighStrength = 1A high-strength cutter: a high-rigidity, hardened-steel or heat-resistant-alloy series (solid ceramic end mills included) with a thick core and shallow flutes; the core (flute-bottom) diameter is about 0.7–0.8 of the cutter diameter.
Standard = 0A standard end mill: a core (flute-bottom) diameter, the web, of about 0.55–0.65 of the cutter diameter on two to six flutes; standard cutters with more flutes are thicker too. The default.